VeriFit® Irritant Smoke Generators

Product Overview

The VeriFit® Irritant smoke Generator comes ready to use. Everything you need for immediate qualitative fit testing is in one sleek, safe, and convenient smoke generator. The VeriFit Irritant Smoke Generator is manufactured by Nextteq International, LLC in the U.S.A. The patented plastic design integrates all traditional fit testing kit components into one convenient device. The small bellows size provides the optimum amount of smoke for fit testing, yet minimizes the risk of overexposure. Unlike other test methods, there is no need for chamber construction, nebulizers, electric pumps, mixing jars, batteries, special test masks, mask probes, or testing hoods. There are also no parts to calibrate, warm up, sterilize, or clean. Irritant smoke is the only OSHA-accepted qualitative fit testing method that relies on the test subject’s involuntary response of smell or taste.

Features:

• The VeriFit Irritant smoke Generator comes ready to use.
• Everything you need for immediate qualitative fit testing is in one sleek, safe, and convenient smoke generator.
• Compact shape that is easily handled and stored.
• Safer to operate and discard than traditional broken glass smoke tubes.
• Both bulb and smoke tube of traditional irritant smoke tube kit are combined in one device.
• Controlled compression to precisely generate the intended amount of smoke.
• VeriFit Irritant Smoke Generators are compliant with OSHA 29 CFR 1910.134.
  

Nextteq® Non-Irritant AirFlow Test Kit

Product Overview

Analyzing air currents is simple and economical using Nextteq’s Airflow Test Kit. The non-corrosive smoke is safe for use in isolation room testing, ventilation ducts, and other environments. To maximize efficiency, tubes can be plugged with the supplied rubber stoppers, and reused at other test sites. The kits are always ready to use and do not require mixing or additional equipment. Kits contain everything needed for testing, including 6 non-corrosive smoke tubes.

Nextteq Non-Irritant AirFlow Test Kits are always ready to use and do not require mixing or additional equipment. Kits contain everything needed for testing, including 6 non-corrosive smoke tubes. Analyzing air currents is simple and economical using Nextteq’s AirFlow Test Kit. The non-corrosive smoke is safe for use in isolation room testing, ventilation ducts and other environments. To maximize efficiency, tubes can be plugged with the supplied rubber stoppers and reused at other test sites.

Features:

• Six Non-Corrosive Smoke Tubes
• One Nextteq Aspiration Bulb Pump
• One Nextteq Carrying Case
• Two Rubber Stoppers
• One Nextteq Non-Irritant AirFlow Test Kit Manual
  

Nextteq® Irritant Smoke Tubes

Product Overview

The Nextteq Irritant Smoke Tube kit, assembled in the U.S.A., is a pump and tube system that is quick, simple, and economical to use for respirator fit testing and airflow indication. The kit contains everything needed to perform multiple fit tests without the cost of extra equipment. The Nextteq aspiration bulb pump and Nextteq irritant smoke tube is ready for immediate use. Tubes can be capped for re-use. Irritant smoke is the only OSHA-accepted qualitative fit testing method that relies on the test subject’s involuntary response of smell or taste. 

The Nextteq Irritant Smoke Tube Kit, a pump and tube system, are quick, simple, and economical to use for respirator fit testing and airflow indication. The kit contains everything needed to perform multiple fit tests without the cost of extra equipment. The Nextteq aspiration bulb pump and Nextteq irritant smoke tube is ready for immediate use. There is no warm-up time or calibration required. Also, there are no special sensitivity test chemical mixtures to prepare in advance.

Irritant smoke is the only OSHA-accepted qualitative fit testing method that does not rely on the test subject’s subjective response. Other types of qualitative fit tests, such as banana oil (Isoamyl acetate), saccharin, or Bitrex, may cause false negative results. There is no need for chamber construction, nebulizers, electric pumps, mixing jars, batteries, special test masks, mask probes, or testing hoods. With a five-year shelf life and broad environmental operating conditions, you can perform fit testing and airflow tracking anytime, and virtually anywhere.

Features:

• High quality glass tube – In the event of accidental tube breakage, each Nextteq smoke tube is wrapped in a thin
• transparent film that protects against the shattering of the glass tube and the release of Stannic Chloride.
• Nextteq – A brand name that indicates the highest quality tube available in the market, exclusively sold by Nextteq International LLC.
• Part number NX9501 and Lot number printed on every tube. Nextteq’s part number and quality assurance number is printed on every Nextteq smoke tube. Smoke tubes of the same production lot have the same Lot No. When a Lot No. is registered, sample tubes with that Lot No. are retained and monitored periodically to verify the quality.
• One-Way Valve – provides safe one-way operation of air flow by test administrator towards the test subject.
• Nextteq Aspiration Bulb Pump – 30cc bulb is easy to use repeatedly when testing multiple subjects.
  

Nextteq VeriFit® Qualitative Fit Testing Kits

Product Overview

The Nextteq Qualitative Fit Test Kit is designed to meet current OSHA requirements for fit testing for the following:

NIOSH-Approved Filtering Facepiece Respirators

• N95 • N100 • P100 • R100

NIOSH-Approved Respirators:

• Half/Full • SAR • SCBA • PAPR Face Mask

Available with Bitrex® - Denatonium Benzoate testing solution or Saccharin testing solution, each has an unmistakable taste that indicates failure on the test.

Each Kit includes:

• 1 Quality Custom-Made Hood
• 2 Nebulizers – One for the Fit Test Solution and one for the Sensitivity Solution
• 1 Box of 6 Pipettes of Fit Test Solution
• 1 Box of 6 Pipettes of Sensitivity Test Solution
• 1 Mini Scissors
• 1 Instruction Manual